West-bend Chris Freytag 86604CF User Manual download pdf (Page 5)

“SET DELAY” “SET” “HOURGLASS” “ADD WATER”

Press to set

the delayed

steaming time.

Indicates the

delayed

steaming time.

Indicates how long the

timer has to count

down to 0:00

Indicates the steamer

does not have enough

water to complete the

steaming cycle.

STEAMING

1. Place the heating base on a dry, level, heat resistant surface, away from any

edge. Note: As food cooks, steam will come out of appliance. To prevent

possible damage, do not place steamer directly under cabinets.

2. Add cold water to the desired level or as shown in the cooking chart. Note:

Never start the steamer without water or with water below the “MIN” line or

above the “MAX” line.

3. Place the drip tray in the heating base. Note: The drip tray must always be

used when steaming foods or cooking rice.

4. Place food items in the food baskets or rice bowl. Place the food basket on top

of the drip tray making sure the drip tray and food basket are aligned properly. If

you are using multiple food baskets, lay a separator ring on top of the bottom

food basket and snap the second food basket in place. Make sure the separator

ring is completely snapped on to the upper basket and all baskets line up

properly. If using the second and third baskets repeat this procedure. If you are

using the rice bowl, place the rice bowl inside any of the food baskets being

used. Always place the cover on the top basket being used.

5. Plug the cord into a 120 volt, AC electric outlet only. The appliance

will beep and display a cooking time of 10 minutes and the display

will read “OFF.” Note: If the steamer is left idle for 5 minutes or

more, the digital display will turn off. Press any button on the

steamer to reactivate the display.

Pressing the “STEAM TIME” buttons will adjust the steaming time up or down

between 00 and 90 minutes. Note: Hold either button down to scroll quickly.

See the steaming chart for approximate cooking times.

6. When the timer is at the desired steaming time, press the

“START/STOP”

button to begin steaming. The “STEAM” icon will

appear in the display to indicate steaming has begun.

To cancel

steaming, press the “START/STOP”

button again.

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments

West-bend Chris Freytag 86604CF User Manual Page 5

Comments to this Manuals