West Bend Kettle User Manual download pdf (Page 5)

• Some minor expansion/contraction sounds may occur during heating and

cooling – this is normal.

• Your kettle is equipped with a self-resetting boil-dry protector: If the kettle is

accidentally switched on with less than the minimum level of water, the boil-dry

protector will operate to safely cut-off the power. For continued use, switch the

kettle to “OFF” position and allow the kettle and control system to cool down

before re-use.

CLEANING YOUR KETTLE

1. Switch kettle to “OFF” position, unplug from electrical outlet and allow the entire

unit to cool completely before cleaning. Do not immerse the kettle, base, cord,

plugs or other electric parts in water or other liquid.

2. The exterior of the kettle can be wiped clean with a damp cloth.

3. The water filter can be removed for cleaning, but should be put back in place

before next use. To remove filter, grab tab with finger and thumb, pull filter

slightly towards the pour spout and lift out. To replace filter, slide back into

place.

4. Decalcify the Kettle periodically. See the “Decalcifying Your Kettle” section.

DECALCIFYING YOUR KETTLE

• Over time, mineral deposits build up on internal parts and effect the operation of

the appliance causing the need for your kettle to be decalcified periodically to

maintain performance. The frequency of decalcification depends on the hardness

of your water and how often you use the kettle. Indications that decalcifying is

necessary are:

o Increased noise during production

Excessive steaming

Longer heating times

• If usage is regular, decalcifying should be carried out as follows:

o With soft water, decalcify once per year

o With medium water, decalcify every quarter year

o With hard water, decalcify once a month

• We recommend the use of vinegar for decalcifying.

1. Fill kettle to the MAX level mark using ½ white household vinegar and ½ water.

2. Plug unit into electrical outlet, switch to “ON” position and allow the kettle to fully

heat and shut off automatically. Dispose of “vinegar” when complete.

3. Follow the same step as above except using clear cool water to rinse any

remaining traces of the vinegar from the system. Rinse twice using clean cool

water each time.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

West Bend Kettle User Manual Page 5